A typical double swing out system with two attachments of your choice is $2100
Prices vary depending on options.
See pricing table below.

Bumpers are available for 40, 55, 60, 80 and 100 series Land Cruisers, 1st through 4th gen 4runners, and the new FJCruiser, in finished or build it yourself kit form. 4×4 Labs Bumpers are often considered the most innovative rear bumpers on the market because of the high departure angle, strength, and level of design.

The assembled bumper system consists of the complete main bumper with two swing arms. These swing arms will accept a variety of attachments that can be ordered separately.

  • Main Shell- Constructed of 3/16” cold rolled steel formed with custom bull nose bending dies create an elegant high clearance profile.
  • Side protection- Protecting the rear overhang is a high clearance, CNC cut, ¼” steel formed plate style skid surface wrapped under the body and attached to the frame.
  • Towing cross member- Strong square tube frame cross member welded to a high clearance tow receiver tube recessed into the main shell of the bumper is visually appealing, performs better and is stronger than the stock towing accessory.
  • Modular Swing outs- Our clever swing out solution is the key to the functionality of this system. We recess our heavy duty spindles through the main shell of the bumper and weld to the side plates of the bumper for optimum strength. The swing arms have two fully welded tube sleeves for the attachments to bolt through. You have the choice of which attachments to carry or leave at home. Built in stops on the spindle shell prevent opening too far and create a clean integrated look eliminating bulky external apparatus welded on as an afterthought.
  • Powerful gas shocks allow the swing outs to open in a controlled manner and hold them open on side hills.
  • The latching mechanism comes standard as a 4000 lb. over center domestic industrial clamp guaranteed not to fail.

4×4labs bumper systems have been engineered to every last detail.

Pricing and parts list for 80 and 100 series bumpers and bumper kits

(40, 55, 60 series bumpers are identical price although some parts in the list below may be different)

Basic bumper- kit $495 Welded and finished $895
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver

Single swing out bumper- kit $895 Welded and finished $1375
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
1 large spindle assembly
1 swing arm assembly with 4 sleeves
Latch and latch plate
1 gas strut with ball stud
2 stoppers

Double swing out bumper- kit $995 Welded and finished $1495
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
2 large spindle assemblies
2 swing arm assemblies with sleeves
Latch and latch plate
2 gas struts with ball studs
3 stoppers

Attachments

Tire holder- kit $125 Welded and finished $225
Swing out clamp bracket
Main upright
2 gussets
Side clamps
Top cap
3 hole tire holder
Square tube receiver
3 wheel studs
3 lug nuts
Hardware

One, two or three gas can- kit $195 Welded and finished $395
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Ladder #1 – kit $150 Welded and finished $350
Swing out clamp bracket
2 Base tubes
2 rungs
Hi-lift bracket with standoff

Ladder #2- kit $175 Welded and finished $375
The first rung on this ladder is sleeved for a third accessory.
Swing out clamp bracket
Main hoop
1 round rung
1 square sleeved rung
Hi-lift bracket with standoff

Cooler basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops your supplied dimensions
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

ARB fridge basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Bicycle rack, 2 bikes- kit $195 Welded and finished $295
Swing out clamp bracket
Main upright
2 base gussets
Rear tire plates
Rear tire plate cross member
Rear tire hold down straps
2 skewer tubes
2 skewers
Safety hook
Top cap
Logo plate

Separate bumper parts

Main Shell- Formed and plasma cut bumper shells for FJ80 and FJ60 $185
Uncut formed main shells 72″ wide- $125
Formed laser cut side skid plates- $125 ea
HD Spindle assemblies- $95 ea.
Swing out assemblies- HD spindle assembly, sleeved swing arm with gas
Gas shock, ball studs and stops – $225 ea.
Accessory bracket clamp- $25
Towing receiver- $25
Recovery points- $30 ea.
Hi-lift bracket- $25
License plate bracket- $10
De-sta-co 4000 lb. Latch and latch plate- $95
Gas struts 120 lb. $25 ea.
Ball studs $2.50
6″ or 8″ Gusset $9
Accessory carrier retrofit sleeve/clamp kit- $29

DIY bumper kits:
For the DIY builds, here is an excellent thread on the ih8mud.com site that shows detailed instructions of how to assemble and install your rear bumper. These are 80 series instructions but they interchange with other models as well.