4x4Labs offers rear bumper kits for those who would like to build it themselves. We’ve found that the Land Cruiser community is filled with extremely talented individuals who like to modify and customize our bumper designs to fit a particular need. We have gained many useful design enhancements to our bumpers by letting our customers build it themselves.

All parts available separately

DIY bumper kits

Pricing and parts list for 80 and 100 series bumper kits

(40, 55, 60 series bumpers are identical price although some parts in the list below may be different)

Basic bumper- kit $495
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver

Single swing out bumper- kit $895
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
1 large spindle assembly
1 swing arm assembly with 4 sleeves
Latch and latch plate
1 gas strut with ball stud
2 stoppers

Double swing out bumper- kit $995
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
2 large spindle assemblies
2 swing arm assemblies with sleeves
Latch and latch plate
2 gas struts with ball studs
3 stoppers

Attachments

Tire holder- kit $125
Swing out clamp bracket
Main upright
2 gussets
Side clamps
Top cap
3 hole tire holder
Square tube receiver
3 wheel studs
3 lug nuts
Hardware

One, two or three gas can- kit $195
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Ladder #1 – kit $150
Swing out clamp bracket
2 Base tubes
2 rungs
Hi-lift bracket with standoff

Ladder #2- kit $175
The first rung on this ladder is sleeved for a third accessory.
Swing out clamp bracket
Main hoop
1 round rung
1 square sleeved rung
Hi-lift bracket with standoff

Cooler basket- kit $225
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops your supplied dimensions
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

ARB fridge basket- kit $225
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Bicycle rack, 2 bikes- kit $195
Swing out clamp bracket
Main upright
2 base gussets
Rear tire plates
Rear tire plate cross member
Rear tire hold down straps
2 skewer tubes
2 skewers
Safety hook
Top cap
Logo plate

Separate bumper parts

Main Shell- Formed and plasma cut bumper shells for FJ80 and FJ60 $185
Uncut formed main shells 72″ wide- $125
Formed laser cut side skid plates- $125 ea
HD Spindle assemblies- $95 ea.
Swing out assemblies- HD spindle assembly, sleeved swing arm with gas
Gas shock, ball studs and stops – $225 ea.
Accessory bracket clamp- $25
Towing receiver- $25
Recovery points- $30 ea.
Hi-lift bracket- $25
License plate bracket- $10
De-sta-co 4000 lb. Latch and latch plate- $95
Gas struts 120 lb. $25 ea.
Ball studs $2.50
6″ or 8″ Gusset $9
Accessory carrier retrofit sleeve/clamp kit- $29

DIY bumper kits:
For the DIY builds, here is an excellent thread on the ih8mud.com site that shows detailed instructions of how to assemble and install your rear bumper. These are 80 series instructions but the attaachments interchange with other models.